v6 Munstycke / Nozzle - Hardened Steel - 1.75mm  - E3D Orginal
v6 Munstycke / Nozzle - Hardened Steel - 1.75mm  - E3D Orginal
v6 Munstycke / Nozzle - Hardened Steel - 1.75mm  - E3D Orginal
v6 Munstycke / Nozzle - Hardened Steel - 1.75mm  - E3D Orginal

v6 Munstycke / Nozzle - Hardened Steel - 1.75mm - E3D Orginal

Regular price 289 kr
inklusive moms. Shipping calculated at checkout.

Orginal v6 Munstycke - Härdat Stål - 1.75mm

Hardened Steel Nozzles - V6

E3D Orginal

Hardened abrasion-resistant nozzles developed to last a lifetime. 3D printing with abrasives such as carbon fiber, glow-in-the-dark PLA or even filled filaments like woodfill all take their toll on a standard nozzle. These nozzles are fully integrated into the E3D Ecosystem and will fit V6, Lite6, and Titan Aero HotEnds, and are compatible with Prusa 3D printers.

Incredibly wear resistant, hardened steel nozzle for printing abrasive materials without wear. 

If you print carbon fibre filled, or other abrasive materials this is the nozzle you need! Carbon filled filaments will cause rapid and significant damage to standard nozzles. Don’t fear however! We’ve developed these new, incredibly wear-resistant nozzles that basically eliminate wear. A standard E3D-v6 Brass nozzle will be significantly worn by printing just 250g of carbon fibre material, that means you could get through 3 nozzles with a single spool of material! However these new nozzles will not wear out, even in extended use with very abrasive materials.  

We took our standard nozzle design, and applied some material science. By changing from brass to a carefully selected steel, and then post-processing that steel nozzle with a combination of thermal and chemical treatments we can create an extremely hard and wear resistant nozzle.

 

Paying a little extra for a hardened, wear-resistant nozzle makes both practical and economic sense. By the time you’ve printed a single spool of abrasive filament you’re saving money. It also saves a lot of time as you won’t be constantly replacing worn out nozzles. Furthermore you’ll be future-proofed for upcoming materials, we think these nozzles should be able to handle just about anything the material manufacturers think of next.

 

Because of the thermal and chemical treatment applied to the nozzle they do have a bit of a dark, sometimes uneven looking coloration and surface finish, and there can be a small amount of residue on the nozzles despite our final cleaning process. The coloration variance is normal and doesn’t affect function, any residue left on the nozzle will quickly be flushed in the first few millimetres of extrusion, especially if you flush it out with an abrasive filled material!